Setting up Apollo Seeder Implement and ECU – 2 Gran and 2 Liquid Tanks

Setting up Apollo Seeder Implement and ECU – 2 Gran and 2 Liquid Tanks

Topcon’s AG Field Series – Smart Tips

Setting up an aftermarket Apollo Seeder with four granular tanks and two liquid tanks with section control requires the creation of a new implement, configuring the control type, detection of the CM-40 and EM-24 ECU’s, tank and boom configuration and drive / channel assignment.

This Smart Tip video explains how to set up the Apollo Seeder Implement and ECU’s for a 2 granular and 2 liquid tank system with section control in less than 7 minutes.

If you have just one ECU connected refer to the video ‘Setting up Apollo Seeder Implement and ECU – Basic 2 Tanks’ which can be found on the following link https://youtu.be/7HXzNNOw0Xg

If presented with the Apollo Firmware Mismatch Error message refer to the ‘How to Upgrade Apollo ECU Firmware’ video which can be found on the following link https://youtu.be/TSDbCVAeosw

SEARCH

Find any New or Used Machinery